Butch 194 #1 Posted July 17, 2010 I have a 79351 50" Toro mid-mount plow that I used on my 314. Now I'm looking to mount it in my C-175 auto. Looking at the interchangeability chart it show this mount will work on 1983 and newer C-175s. I haven't tried to figure mine out yet but was assuming it was a 1981. Are the lift mechanisms/attachments not the same for all the blackhood C175s? Does it attach with the chain or does it attach with different pieces? Thanks Butch S. Jersey Share this post Link to post Share on other sites
Brrly1 1,146 #2 Posted July 17, 2010 Butch, I have to believe it will fit without any problems. Hooks up just like the other one. As far as the chain goes I guess it would depend on if you want any down pressure or not. Good Luck! See Ya, Bye Burly :D Share this post Link to post Share on other sites
C-Series14 15 #3 Posted July 17, 2010 I agree with John...it will work. It might be because they only offered a 40" grader blade up to 1982 then in 1983, they offered a 50" grader blade along with the 40" for the C-Series. Share this post Link to post Share on other sites
Butch 194 #4 Posted July 17, 2010 Thanks Burly and Mike!! Butch S. Jersey Share this post Link to post Share on other sites
