Cody 277 #1 Posted July 2, 2010 Hey guy's, i just bought a C-160 with a Didier sickle bar at the WHCC show and was wondering what you guys could tell me about it. Have you guys had good luck with them? The mower appears to be very well built and is very smooth when operating. I am wondering where i can get replacement knives for it. I bought some knives from Dales mower service at the wheel horse show and am wishing i had bought more just to have on the shelf I looked on partstree and it says that they are no longer available through toro. It uses the same knives that wheel horse used on their mowers. Any comments and advise is greatly appreachiated. Share this post Link to post Share on other sites
pfrederi 18,643 #2 Posted July 2, 2010 Sections (aka knives) stone guards, wear plates etc. are pretty standard across teh small sickle bar mowers. I have a wheel horse sickle mower and a Jari Monarch walk behind most cutter parts interchange. Try this place I have gotten parts from them for the small mowers and my full sized one. Webbs Sickle Service Share this post Link to post Share on other sites
mavfreak 11 #3 Posted July 2, 2010 tsc should have them also Share this post Link to post Share on other sites
