brider 0 #1 Posted June 30, 2010 I just bought a nice C-125 with a 42" RD deck today. I was going over the whole thing to dial it in to mow, and just from tape measuring the bottom edge of the deck at a common edge on front/back and side-to-side, I see that it's not level in any direction. I deduced that the single link in the rear that attaches to the crossbar that goes to each rear deck wheel will affect the front/back levelling, but I could not see any way to effect side-to-side. Is this a fixed feature of the deck? Share this post Link to post Share on other sites
rickv1957 74 #2 Posted June 30, 2010 Is this a fixed feature of the deck? Yes it is a fixed feature and should be close side to side barring any damage,Rick Share this post Link to post Share on other sites