suxatpball 0 #1 Posted June 21, 2010 hey yall, just spotted a bronco 14 for sale. i currently have a B80. Im wondering if my current snow blade will work on the bronco with the hydro. and everything??? Also i know nothing about the bronco but everything seems to work ok, no leaks from the hydro hoese. Anything bad about these models? Model # 1042387 (8 was either an 8 or 0 Share this post Link to post Share on other sites
rickv1957 70 #2 Posted June 21, 2010 The bronco is a good tractor,made in 71 and 72, check for a good strong trans after warm up,if your B 80 is a 8 speed,blade should fit with maybe minor mods,Rick Share this post Link to post Share on other sites
suxatpball 0 #3 Posted June 21, 2010 my b80 is not an 8 speed its a 74 or 75 i believe i have the long frame blade. I know the bronco currently does not have the back brackets to attach the blade Share this post Link to post Share on other sites
Buzz 502 #4 Posted June 21, 2010 This Bronco 14 is a 1972 and the model number is written like this 1-0423. Like Rick said, run it until the engine gets real warm and see if it has any trouble pulling hills in forward or reverse. Good luck. Share this post Link to post Share on other sites
suxatpball 0 #5 Posted June 21, 2010 any1 help me with the blade fit? Share this post Link to post Share on other sites
rickv1957 70 #6 Posted June 21, 2010 If your blade is a long frame blade it should fit,Rick Share this post Link to post Share on other sites
