Kelly 1,028 #1 Posted March 22, 2008 Ok I'm looking for a trans pulley for the 1055 I just picked up can anyone tell me if it's the same as? I know it's spaced out from the trans farther that my 656 is it just turned around or is it diff.? I don't have a parts break down of it and toros site dose not show a pic. so I don't know what the part no. is. TT you out there? Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #2 Posted March 22, 2008 Kelly, the 1055 takes P/N 5425 pulley. It's the same pulley that's on a 1045/1056/1057/1257 and does stick out away from the transmission more than the P/N 1611 pulley like the "small block" (like the 656 or 855) tractors use. I can get a picture of one if you need it. Share this post Link to post Share on other sites
curly 0 #3 Posted March 22, 2008 Kelly what would we do without the TT. Curly in Kaintuckee Share this post Link to post Share on other sites
BPjunk 184 #4 Posted March 24, 2008 Kelly, On the old big engined short framed tractors of the mid 60's the transmission drive puller has the hub with the set screw pointing inwards towards the transmission so the alinement of the pullies "V" groove is in alinment with the engines drive pulley. Bill in Richmond, Va. Share this post Link to post Share on other sites