hcminis 1,532 #1 Posted May 25, 2010 Hello all. Searched the board as much as I could but no luck finding the belt sizes for a Suburban 550. Could someone please point me in the right direction or let me know the belt sizes. Have the ole girl running now but grinds bad because the drive belt is a little to small. Plus don't have the belt from the engine to the deck. Still have an idle problem as the more I ran the tractor the worse the idle was. Plus the faster I ran the throttle the more it starved for gas, at least I think. Hope to get the neighbors help again tomorrow. Thanks Share this post Link to post Share on other sites
hcminis 1,532 #2 Posted May 25, 2010 Never mind. Found it. P/N 1569 Length 28.95 4L Still need the deck belts if anyone can/will help. Thanks Share this post Link to post Share on other sites
CasualObserver 3,406 #3 Posted May 25, 2010 From Engine to deck pulley Part 1561 Share this post Link to post Share on other sites
rickv1957 70 #4 Posted May 25, 2010 I may have them belts,let me know if you need them,Rick Share this post Link to post Share on other sites
hcminis 1,532 #5 Posted May 25, 2010 Thank you Jason. Rick, PM sent. Thanks a bunch guys Share this post Link to post Share on other sites