jimbotelho 1 #1 Posted May 23, 2010 guys im narrowing down this belt problem to the idler pulley//linkage does anyone have a picture with the breakdown thanks Share this post Link to post Share on other sites
Shuboxlover 474 #2 Posted May 24, 2010 when I replaced the drive belt on my C160 auto, I had the parking brake engaged when I put the cover back on, took it for a spin and the belt started smoking, so I came here, asked what just happened, and found out I was supposed to have the parking brake disengaged so the belt was tight when I put the cover on.......wore a nice groove in my brand new belt :D Share this post Link to post Share on other sites
jimbotelho 1 #3 Posted May 25, 2010 fyi everyone in case anyone has had the drive belt smoking ///idler pulley not positioniingI right believe that I found the answer is (no not not junk the tractor )but the belt that Iwas told to use was a 84in I installed a 85in and the belt smoke went away and the idler drops down to the correct position. thought someone may need this info this was for a c160a Share this post Link to post Share on other sites
