perry 82 #1 Posted March 21, 2008 i got the hydro lift all installed and working today on the landlord. i just have to do some finish up and its done. its awsome, even has down pressure for the rear lift hitch. ill have finshed pics and video tomarrow Share this post Link to post Share on other sites
T-Mo-(Moderator) 4,345 #2 Posted March 21, 2008 Perry, That'll be great once it's done. Looking forward to the pictures and yes, the video. :thumbs: Share this post Link to post Share on other sites
combatmp29r 27 #3 Posted March 21, 2008 Looks good Perry I didn't realize in your other thread about the lift that the cylinder case was hexagonal. Did anybody else use a cylinder like that? Share this post Link to post Share on other sites
Kelly 1,028 #4 Posted March 21, 2008 That will be nice If you could get your hands on a right lift arm and have separate lifts now I might know someone that has one :thumbs: Share this post Link to post Share on other sites
kpinnc 10,930 #5 Posted March 21, 2008 Looks great Perry! Looks like you'll get quite a bit of use out of it when she's all done! kevin Share this post Link to post Share on other sites
Rollerman 290 #6 Posted March 22, 2008 Perry did you get a chance to test out the HYD lift pushing snow? :thumbs: Share this post Link to post Share on other sites
perry 82 #7 Posted March 22, 2008 yes i did. but it doesnt want to hold the blade up. it just keeps slowly dropping i have got the lift to hold the blade about 10 times. seems if i raise it at full throttle it will hold. but most the time it wont. i am hoping it just needs to have the fluid running threw and break it back in. this sat in the a closet for about 2 years before i bought it. . Share this post Link to post Share on other sites
Kelly 1,028 #8 Posted March 22, 2008 Try adding a little power steering sealer/conditioner :thumbs: Share this post Link to post Share on other sites
