WH Tiller Model Number 67-36tl01 pulley size

[probolpher 0]

Hi Guys.

I need your help. I have a Wheelhorse Tiller model number 67-36tl01. It is currently attached to my Wheelhorse. I have all the parts with the exception of one pulley. It is the small Idler pulley that is in front of the 9 1/2 inch pulley on the tiller. It mounts to an upside down L shaped bracket on the piece that attaches to the tractor.

I talked with my Wheelhorse dealer and they have told me that Toro has discontinued the production of this pulley. So now I need to try to match up an aftermarket pulley for the tractor. I would really appreciate it if someone has a model tiller like this, if they can tell me the diameter of the pulley so that I can try to match it up.

Thanks!

Brady in Vermont.

[linen beige 15]

You may check another dealer? Although they aint cheap, all the pulleys on your tiller are still available from Toro's website. They are also available from Parts Tree.

[probolpher 0]

I did research the part and appreciate your reply. My dealer certainly isnt very helpful. This morning after much research, I found that while Toro has discontinued that pulley, they replaced it with a different pulley that is the same size but made out of cheaper material. I have ordered one of these and will pick it up tomorrow. Hopefully it will work. It is also a $20 pulley instead of $110 which is what the old one would have cost if they were still able to order it.

Thanks again.

Brady