skidvarn 0 #1 Posted May 16, 2010 Hello Redsquare,I have a 79 c-161.I bought a used 73 or 74 36 inch tiller.The tiller is all I have,there must be a belt assembly to power the tiller.Or can I use the tach-o matic from the front of the machine that runs the mower deck?Garden season is near I'm not looking forward to bouncing around with my old walk behind.Any advice would be great,I'm in NH .Thanks, skidvarn. Share this post Link to post Share on other sites
C-Series14 15 #3 Posted May 16, 2010 You need a 139" belt, part number 1599 and the mid tach-a-matic idler assembly. You also need the rear axle tach-a-matc if you don't have it already. There are several posts about folks on here with the same situation. Others will chime in with there info... :D Share this post Link to post Share on other sites