bo dawg 517 #1 Posted May 13, 2010 I can't find the part number for the 5/8" shaft spindle bearings on a deck. All I can find is the one's for the 3/4 " My deck is a 1980 05-48ms02 and it just shows the 3/4 and two of mind is 5/8. I tryed looking up other years but same or something completely different. :D Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,471 #2 Posted May 13, 2010 Is it possible the 5/8" bearings are really 17mm or .669" ID? 6203 bearings with a 17mm ID are used in the later decks and before that they used 6203 bearings with a 3/4" ID. Garry Share this post Link to post Share on other sites
bo dawg 517 #3 Posted May 14, 2010 I don't know, I just couldn't find anything on Toro's part finder. Share this post Link to post Share on other sites
Butch 194 #4 Posted May 14, 2010 BoDawg my shafts are 5/8" diameter and these are the bearings I bought. I just had to pop one of the shields off. My spindles are off a 42" deck and DO NOT have keys. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...e=STRK:MEWNX:IT Butch S. Jersey Share this post Link to post Share on other sites
bo dawg 517 #5 Posted May 15, 2010 Thanks guy's, I guess I will have to try them. Share this post Link to post Share on other sites
