Mower deck belt routing on 1054 Wheel Horse

[Lane Ranger 10,497]

Iggy68 asked me about routing of the mower deck drive belts on the 1054 's RM-483 or RM-484 48 inch mower deck. I told hiim I would take several photos to show how these are set up on the 1964 1054 Wheel Horse tracctors.

I am not sure which one is on this tractos as we have three of these decks and one was fom a 953 wheel horse - I beleive.

Here is a photo of the tractor and mower deck from this am:

Another tractor photo from the right side view of deck :

A photo looking down from the top of the PTO and engine pulley:

A side view :

A view from the front to back and you can just see the center pulley with the belt around it:

This is a shot of the mower deck off the tractor from last Fall:

Hope this helps Iggy68 and any others that may need these photos.

[linen beige 14]

Here's a close up of the routing decal on my RM-485.

[Lane Ranger 10,497]

Jim: I forgot all about that decal! Thanks for posting that.

Anyone should be able to understand that one !

:D

[Iggy68 28]

Thanks lane. That is a big help.

[rollie 0]

i need the idler bracket 1054 part no.4400 mower  deck rm 483 the  same part no. 953 has the same mower deck

[rollie 0]

i need idler bracket for 1054  mower deck part no. 4400 for rm 483 same one the 953  has 1054 deck rm 484 same one 

[rollie 0]

i need idler bracket for 1054 mower deck  part no 4400 for rm 483 same one  the 953  has 1054 deck rm 484 same one