zero 0 #1 Posted May 6, 2010 I have a 1987 312-8 which I am restoring and am at the point in the project where I am ready to install a new drive belt. I would appreciate some assistance on a part # and dimensions for the correct belt. Are there options beyond a WH dealer and are there options with regard to quality and materials? Thanks for your considerations Zero Share this post Link to post Share on other sites
C-Series14 15 #2 Posted May 6, 2010 Part number 7473, HB/5L 81.95" Share this post Link to post Share on other sites
Duff 206 #3 Posted May 6, 2010 Zero, go wtih the OEM belt if you can. I've run aftermarkets and they simply don't hold up or perform as well, at least on my 312-8 tractors, and I don't overwork or abuse my machines. Duff :D Share this post Link to post Share on other sites
WheelHorse_of_course 99 #4 Posted May 6, 2010 FWIW I have good luck with off-brand OPE belts with aramid construction. To find the Toro part number for your deck go to the links page (pinned to the top of this board) and scroll down to "Other Links" click on the link thst says: Toro/WH Lubrication Recommendation Charts best of luck :D Share this post Link to post Share on other sites
