C-120 PTO Belt Size?

[firemart 0]

I am going nuts trying to find the belt I need for the manual PTO on my C-120! It's not in the parts diagram anywhere! I'm trying to get an order up, and I need it now.

[catman81056 3]

The belt # will be in the diagram of the deck it has. Go here:

https://lookup3.toro.com/partdex/index.cfm?...es&xCaller=Toro

Type in your tractor mod# and view attachments available. Find the deck you have, go back to the parts viewer and type the deck mod#. View the parts breakdown and your betl will be there.

[firemart 0]

Thanks!!! I think I found it. It's #102607.

[Old Dave 0]

That WH number will cross to a Green Gates power rated belt #6889 (1/2" x 89").

I've used the green ones for years and they are pretty tuff.

[firemart 0]

Thanks. I ordered the Toro from Jack's, but, I am keeping notes on cross-referenced stuff for the future.

[Doubletrouble 10]

Is there a place we could find the sizes of the belts from the orig. part #? It would be helpful if ordering online and what not.

[Old Dave 0]

On this forum check at the very top under wheel horse links, then parts suppliers scroll down to Gates Belt conversion (converts Toro/ Wheel horse to Gates or NAPA. It's very handy...

Dave

[firemart 0]

I know that I am new here, but, a sticky with the OEM numbers would be a great idea, IMHO.

[C-Series14 15]

Join this group, then under "files", there is a chart...

Mike, has all the links, in SW Ohio