rickyinbg 0 #1 Posted April 18, 2010 I checked on Toro's web site and could not find a manual for a ID# 87-04CB01-02729. Anyone know if a snow cab for a B/C series would fit a 95 520H? Share this post Link to post Share on other sites
MalMac 1,332 #2 Posted April 18, 2010 The old cab for the b/c's will not fit correctly. Tha cab is too short. I know of some guys that have made them fit, but the seat is slid all the way forward and they had too do some modifications to the frame work of the cab. Maybe someone will come along and post that has made the cab work and shine some light on the subject. I have an old cab for a C series and it just will not fit my 520 with out modifying it. Share this post Link to post Share on other sites
rickyinbg 0 #3 Posted April 18, 2010 malmac1, I saw a cab on ebay and was wondering. Share this post Link to post Share on other sites
Operator 7 #4 Posted April 18, 2010 With the high back on the 520 seat you have to slide seat forward, Then on the front uprights they mount differently. But with a little fabing that can be altered too. I took one cab from an older 520 and put on the new style, it worked except for the seat issue. Randy Share this post Link to post Share on other sites
jimbotelho 1 #5 Posted April 18, 2010 I purchased a sears snow cab from wallfish and it fit right on my 417 all i had to do is drill a couple of holes in the footrests and bolt it down the rear attached to the rear hitch very easy :omg: Share this post Link to post Share on other sites