NAPA Mower belt Cross-Reference

[wh5208speed 667]

Does anyone know the NAPA cross-reference for the the spindle belt on a 42" SD.?The deck is a 1994. The Toro part # is 6738

Thanks,

Thad

[qd-16 15]

Well, the part number I came up with is 74H860, this is napa's number.

The sten's part number is 265546 and the dimensions are 1/2" x 86 1/8".

[wh5208speed 667]

Thanks,

Thad

[zach l 2]

they should be able to cross it.i mean i work there and i should be able to

[Buzz 502]

Here's a handy belt interchange that will cross reference Wheel Horse to Gates or NAPA:

http://www.gates.com/part_interchange/inde...ocation_id=3286

[gwgdog66 23]

Napa number I use is a 4L860W

[GlenPettit 1,718]

Wheel Horse used 'Agricultural' belts, they were made by Gates just for Wheel Horse/TORO; and had a slightly different side-angle, base-width, thickness and composition, and will always have the Wheel Horse Belt numbers stamped into the belt (I believe all WH belts since mid-60's are still available, being made).

For belts that are in constant high-speed and heat-producing use, the Wheel Horse belts are well worth the 10-20% higher cost, the "life" of the WH belt may be double or more than other brands.

Ag belts will use #'s like HA, HB, HC, instead of conventional belts #'s of A, B, C.

Belts always fail in the middle of the job.