CasualObserver 3,406 #26 Posted April 12, 2010 Nice to meet you too Jason... was glad it all worked and I was able to help you out. The blade is factory, not fabricated... I should have got mine down so you could have seen it... That extra little piece has been welded on and the spring is in the wrong place. I don't have any top pictures, but here's a side view. If I get some time I'll get it out and take another picture or two for you if someone doesn't beat me to it. Share this post Link to post Share on other sites
Confused99 2 #27 Posted April 12, 2010 Nice to meet you too Jason... was glad it all worked and I was able to help you out. The blade is factory, not fabricated... I should have got mine down so you could have seen it... That extra little piece has been welded on and the spring is in the wrong place. I don't have any top pictures, but here's a side view. If I get some time I'll get it out and take another picture or two for you if someone doesn't beat me to it. Nice to meet you too Jason. Interesting, I figured it was fabed being the position locking pin is made from a 1/2" drive extension . I guess I won't throw it then. Anybody have any idea what is going on in the trans? Like I said, it moves about 3 feet forward or backward and then it just locks up. If I get a chance, I will pull it apart this week. Jason Share this post Link to post Share on other sites