HunterdonNJ 1 #1 Posted April 2, 2010 Just reassembled my Kohlor 12 from my c121 and I seem to be stumped on the cable hookup to the carb. I took many pictures for reassembly purposes but forgot the one with the air cleaner off to show the linkage / cable hook up. Any picture or illustration showing how would sure be helpfull! Thanks much, Jonas Share this post Link to post Share on other sites
gwgdog66 23 #2 Posted April 3, 2010 Here is the best one I have. It's a 75 C-160 Share this post Link to post Share on other sites
HunterdonNJ 1 #3 Posted April 3, 2010 That helps! There must be a spring then that goes from that to the carb. Makes since. Thanks, Jonas Share this post Link to post Share on other sites
gwgdog66 23 #4 Posted April 3, 2010 That helps! There must be a spring then that goes from that to the carb. Makes since. Thanks, Jonas I found a couple of more. Govenor springs This one is looking up from the front right side of the engine right below the carb and above the fuel pump. The P clamp is holding the throttle cable in place Share this post Link to post Share on other sites
