Will this international tiller fit a WH?

[Pirate 0]

I can't seem to find a picture of a WH tiller, to compare with the International one in the picture. just wondering if it could be adapted. I think in a picture of a WH tiller, it had a similiar large pulley.

Also, it looks like at least a 48" tiller. I have a 414-8 WH

[Kelly 1,033]

Cubs use a right angle gear box to run those tillers, I have a tiller just like that one, I'm not sure it would turn the right way if direct drive like a WH? also the mounting is way differnt, where are you located? I have a couple WH tillers to sell.

[Pirate 0]

The guy has the gear box also. I haven't seen it yet. What does the gear box do ? Is the Int. a verticle shaft tractor?

I'm in SW FL

[Indy w h 5]

The guy has the gear box also. I haven't seen it yet. What does the gear box do ? Is the Int. a verticle shaft tractor?

I'm in SW FL

The Cub Cadet in the picture is a horizontal Kohler engine.

The Cub tiller will NOTfit a wheel horse.

Indy

[big mike 13]

The PTO on the Cub is directly behind the grille and the crank runs parallel to the frame.The gear box bolts to the back side of the rear end and a loooong belt runs from the PTO to the gear box.The gear box has a second pulley that runs up to the tiller.

Will not fit?.....untrue!

Will it fit easily?......no.