WHwest8597 85 #1 Posted March 18, 2010 Anyone have suggestions on brand, size and type of lawn roller to use? Share this post Link to post Share on other sites
rickv1957 74 #2 Posted March 18, 2010 Wheel horse made a 36"roller,that could be filled for 200lbs or so,Rick Share this post Link to post Share on other sites
C-Series14 15 #3 Posted March 19, 2010 Got a 48" one from TSC...got tired of filling with water and draining every fall so cut a hole in it and filled it with sand. Weighs around 1,000 lbs! Have pulled it with the RJ a couple times!!!! :omg: Share this post Link to post Share on other sites
jdwheelhorse 0 #4 Posted March 19, 2010 Fab a frame and tongue and use a 55 gallon drum always wanted to do that Share this post Link to post Share on other sites
d200 0 #5 Posted March 19, 2010 I think the 55 gallon drum idea is a good one and very cost effective. I 've thought about doing that myself. Share this post Link to post Share on other sites
C-125 0 #6 Posted March 21, 2010 I rented one for 1 day for $13.50. I will be able to do a couple of yards and the lawn at work. For that cost I can do that for 10 years for less than the cost of a new one! Share this post Link to post Share on other sites
Kelly 1,033 #7 Posted March 23, 2010 I bought a plastic one, it don't rust no dents, weighs about 800lbs full of water, use RV anitfreeze in it and leave it, cost about $100 8 years ago at TSC. it's 48" wide can't remember how tall about 24" maybe a little less. Share this post Link to post Share on other sites
MalMac 1,332 #8 Posted March 23, 2010 Took a cardboard barrel inserted a 1in. steel rod thru it for an axel, poured it full of cement let set up for about a week than striped cardboard off and made a hitch. Was worried it would be to brittle. That was 30yrs ago. It has worked just find. It just alittle to heavy. Tim Share this post Link to post Share on other sites
