walking horse 0 #1 Posted February 23, 2010 hi does anyone know if you can get the lining for the pto dish? the one with the rivets thanks Share this post Link to post Share on other sites
markslawnmowerworld 4 #2 Posted February 23, 2010 The one's with the rivets are no longer available......but every once in a while i will see one on ebay.....the new one's are glued on and last longer.... B) Share this post Link to post Share on other sites
markslawnmowerworld 4 #3 Posted February 23, 2010 this is the part# for the new one 94-6650 it is available through toro. B) Share this post Link to post Share on other sites
walking horse 0 #4 Posted February 23, 2010 thanks for imfo Don Share this post Link to post Share on other sites
CasualObserver 3,411 #5 Posted February 23, 2010 Be careful... there were different sizes over the years. Know what you are replacing, and know what you are ordering! Many dealers don't like to (and some flat out won't) take back parts that are special ordered. Share this post Link to post Share on other sites
markslawnmowerworld 4 #6 Posted February 23, 2010 This is very true......it is best to know your tractor id# first......... Share this post Link to post Share on other sites
rickv1957 74 #7 Posted February 24, 2010 A good used disk is not to hard to find also,Rick Share this post Link to post Share on other sites
walking horse 0 #8 Posted February 24, 2010 fond out that there is a 6'' and 6 3/4 '' i have 6'' dish and cone they are both bad will a 6 3/4 work if i replace both of them i can find the 6 3/4 ones on ebay don Share this post Link to post Share on other sites
