1961551 2 #1 Posted February 22, 2010 restoring the 633. it needed it bad. whole tractor was worn completey out. anyway, its going back together . got a show in april. DEADLINES it has about a 2 inch a hole it the dash for a guage or a plate. it had an oil pressure guage in it when i got it. but it had an h55 wich is a oil pressure fed engine. i know thats not correct, but thats what the previous owner used to fill the hole. its getting a k161 to replace the h55 lauson. so, what would be original to fill the hole in my dash? thanks, jimmy Share this post Link to post Share on other sites
Rollerman 290 #2 Posted February 22, 2010 It would of had a press fit sheet metal plug with an on/off kill switch in it. Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #3 Posted February 22, 2010 Maybe this will help: Share this post Link to post Share on other sites
