Lane Ranger 11,395 #1 Posted February 8, 2010 Anyone know what size fuel sediment bowl will fit under the 1054 Wheel Horse as a replacement? I am not sure the size of the connection that is used on the sediment bowl or if a new replacement is available and would appreciate any information on a size and/or source for one of these glass sediment bowls. B) Share this post Link to post Share on other sites
rickv1957 74 #2 Posted February 8, 2010 You can buy a complete new assembly for 10.00 on ebay or local parts outlet,I think the connection is 1/8" npt,Rick Share this post Link to post Share on other sites
wallfish 18,086 #3 Posted February 8, 2010 $7.95 http://www.psep.biz/store/small_engine_fuel_filters.htm Share this post Link to post Share on other sites
sorekiwi 761 #4 Posted February 9, 2010 I've given up using sediment bowls. I got one from Napa for about $10, installed it and it was fine. 3 hours later I walked into the shop to find 1/2 gallon of gas on the floor underneath the tractor. The seal for the glass bowl had swelled up and dumped the contents of the tank onto the floor. I did find someone who had cork gaskets for these (possibly TNT Parts on ebay?) and that solved the problem, but that experiance soured me on them. Now I use an inline filter (which are better anyway) and one of the little inline plastic stut off valves. I think Rick is right, the fittings are 1/8" NPT. Share this post Link to post Share on other sites
Iggy68 28 #5 Posted February 9, 2010 I agree, forget the bowl and go with a inline filter. I used a bal valve as a shut off. Share this post Link to post Share on other sites
Lane Ranger 11,395 #6 Posted February 9, 2010 Well we have one of the 4 operating 1054's we have with a sediment bowl and I think it is not the original but the gasket and screen are in it like the originals. I know John Deere had a cork like material that was used as a part of theri sediment bowls about the same time. I thought it would be nice to keep one somewhat original although we use inline filters now on all the other tractors we have. Thanks Wallfish and Sorekiwi and Iggy too! Share this post Link to post Share on other sites
sorekiwi 761 #7 Posted February 9, 2010 I agree with you, Lane. One of the things you kinda expect to see on an old tractor is a sediment bowl, especially on the 60's vintage tractors. I wonder if you could internally bypass the bowl and the shut off valves (where they tend to leak from) and use it purely as "decoration"... Share this post Link to post Share on other sites