hotrodmerc 1 #1 Posted February 6, 2010 Anybody know the length and width for the main drive belt on a B-80 8 speed. I snapped mine while putting the tractor back in the building. Share this post Link to post Share on other sites
GlenPettit 1,717 #2 Posted February 7, 2010 For your B-80 (#61-08K801), it uses Wheel Horse Belt #7473, it is 81.95" long, it is an Agricultural Belt, HB/5L (cross section size: 21/32" wide and 13/32 high). I would strongly recommend getting it from TORO with the correct Wheel Horse number, Gates does make the belts for Wheel Horse, but these OEM TORO belts are heavier and have a unique Agricultural angle, well worth the 20% more, you should probably get 3-times the life; and this Drive belt is a little hard to replace as compared to a mower drive belt, go with quality. Share this post Link to post Share on other sites
hotrodmerc 1 #3 Posted February 7, 2010 Thanks...mine doesn't have any numbers on it. At least I was finished pushing snow when it broke. Share this post Link to post Share on other sites
rickv1957 74 #4 Posted February 7, 2010 Im with Glen on the OEM belt, is one to use!!Rick Share this post Link to post Share on other sites
