857 generator parts question

[chevy030303 0]

what do i do if my start generator and regulatoris bad ??? :banghead:

[MikesRJ 558]

what do i do if my start generator and regulatoris bad ???

Find new parts and replace them?

Oh, and :WRS:

[Retired Wrencher 5,773]

to Chevy I have a 1257 that does not charge I just put a trickle charger on it ,every now and then these old start/gen start so easy that it does not take much juice to get them going. hope this help you out Gary B....... :banghead:

[chevy030303 0]

:banghead: new parts lol where do i git then :WRS:

[MikesRJ 558]

That depends on the machine you are working on. Which do you have?

Regulators can be had off of eBay by the dozens. Short of the rotor windings and rotor contacts (a good machine shop can true the rotor contacts for you if they are not beyond repair) being bad, the generator can be rebuilt; kits also available off of eBay and most mower shops. The starter/generator is a rotor, a set of contacts, a few bearings, and a stator case. Not much else there to go bad.

There are only a limited number of issues which can make your starter generator itself go "bad". All it is is a motor. I would suggest you troubleshoot your electrical/charging system to identify the culprit:

http://www.mywheelhorse.com/graphics/file/...vice-Manual.pdf

[chevy030303 0]

i have a 1967 wheel horse 857 kohler 8hp k181 and i need a new kohler 8hp k181

Attached Image (Click thumbnail to expand)

[HorseFixer 2,013]

i have a 1967 wheel horse 857 kohler 8hp k181 and i need a new kohler 8hp k181

You arent going to find a Brand New Kohler K-181. They are not made any longer. You may however be lucky enough to find a new old stock engine, but it would be a long shot. Your best bet is do a rebuild or find a good core and rebuild, they still make OEM rebuild kits. by the way :banghead:

[chevy030303 0]

thanks so i need to fin a k181

[Buzz 502]

Chevy, not to be rude, but jgun45879 asked the original question then you jumped into his topic and started asking your own questions. His question may or may not have been answered to his satisfaction. If you have questions, start your own topic and we will be glad to help you if we can. Otherwise it can get real confusing real fast........

[nylyon-(Admin) 7,880]

Thanks Buzz, I split out the topic.

[chevy030303 0]

sorry my f up sorry agen :thumbs: