PoolGuy 0 #1 Posted January 23, 2010 Hello All I just bought a toro wheelhorse 416xt with a plow weights and chains and have a question about the lift height.The blade will only lift a few inches off the ground because it hits on a u shaped bracket on the front.The bracket seems to be there to keep the blade centered? I was hoping some of you have had experience with this set up and could post some tips? Thanks Scott Share this post Link to post Share on other sites
rickv1957 74 #2 Posted January 23, 2010 Hello and Rick Share this post Link to post Share on other sites
Sparky-(Admin) 23,146 #3 Posted January 23, 2010 I dont have that style tractor Scott but the plow on my C-105 only lifts to just under 4 inches. I know thats not comparing apples to apples but thought I throw it out there. Mike....... Share this post Link to post Share on other sites
mcwh1950 2 #4 Posted January 23, 2010 poorguy here is a link to a picture of a 417xt with a plow on it. http://www.wheelhorseforum.com/index.php?showtopic=1511 btw :thumbs: Share this post Link to post Share on other sites
rustynut 4 #5 Posted January 23, 2010 Umm can u put a picture of what your talkin about on here so I can see if I can help u at all Share this post Link to post Share on other sites
Nick 13 #6 Posted January 23, 2010 Picture might help. Is the blade original or did someone make it fit? Share this post Link to post Share on other sites
refracman 167 #7 Posted January 23, 2010 I had to make a different lift bar for mine as the the one that cam in the kit was to short. Think it raised it up around 4in thou. I dont have it mounted this year as Im useing a 160 for plow duties now. Share this post Link to post Share on other sites