NEED HELP WITH LOADER FRAME

[dustycarter 3]

I have finally came around to it. I was supposed to finish it by last November. But it's been hectic. I need some pictures of where the loader frme connects to the tractor frame. I have a 312-8. Any pictures of various points on any loader will help. And if you have some plans on the computer you wouldn't mind sending to me that would help. Any kind of information is helpful. Thank you.

[stevebo-(Moderator) 8,590]

The loader subframe points are the quick attach front and mid mount then the frame slides over the rear transaxle. Good luck-

[fireman 1,022]

Here are pictures of an ARK loader frame from a Wheel Horse. Can't remember what model. Use your imagination with this picture and i'm sure you can come up with something.

[dustycarter 3]

Stevebo and fireman, thank you for your help. That did help. And thanks for the pictures. That helped me out quite a bit. now I am working on the measurements. I appreciate it!

[fireman 1,022]

If you need some more pictures let me know. My subframe is the exact one you need. It is mounted under my tractor but I can take some pictures if you need anything specific.

[dustycarter 3]

thank you fireman. I will try and not bother you. But I do appreciate you helping me. Thank you