leichty 0 #1 Posted January 17, 2010 Hey guys, this might be a tough one to answer. I recently bought a B-81 (A really small tractor) I found a deck i think might fit it . I was wondering if anybody could describe the deck or better yet send a picture of what one looks like. The tractor does not have any type of lift mech. The deck i think might go on it looks like it is angled. Thanks for your time. Share this post Link to post Share on other sites
Kelly 1,033 #2 Posted January 17, 2010 I could be wrong but I'm pretty sure the deck in this post will fit your tractor, look about half way down the page, but don't take just my word on it, and on a side note I have a deck just like that one if your looking it came off a B-112 link http://www.wheelhorseforum.com/index.php?showtopic=15055 Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #3 Posted January 17, 2010 Here's the 37" two-blade deck: P.S.> Moved to Implements & Attachments forum. Share this post Link to post Share on other sites
leichty 0 #4 Posted January 17, 2010 Thanks Guys for the help. Both of these decks look like they would work, They both have the same way of hooking to the tractor. The only thing that bothers me is that i have never had a wheel horse that didn't have a lift bar. Is that the way this was made or is there something missing. Thanks Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #5 Posted January 17, 2010 It's a lawn tractor. The lift lever kit was used for the dozer blade, but the deck just scoots along on the ground under the tractor. The only thing you can do is raise the deck via the gauge wheels if you need a little more ground clearance. Share this post Link to post Share on other sites
leichty 0 #6 Posted January 17, 2010 Thanks Terry, Is there anything you don't know about these old horses... Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #7 Posted January 17, 2010 Is there anything you don't know about these old horses... Quite a bit, actually....... but thanks to the internet (and lots of manuals), I learn more and more everyday. Observation and retention are the best tools and hands-on experience is the best teacher. :thumbs: Share this post Link to post Share on other sites
Rideawaysenior 25 #8 Posted January 17, 2010 Terry is one of the best go to guys here. If he doesn't know the answer right away, he usually gets it pretty quick. I like to think I know quite a bit too, but if I could remember half of what he forgets, I'd be doing 100% better then what I know now. Share this post Link to post Share on other sites
