Can Anyone ID This Dash Panel?

[rmaynard 16,700]

In my search for the elusive NOS B-100 Dash Panel, I came across this one.

Does anyone know exactly which model this is from?

I have highlighted the embossing with chalk to make it more visible. Otherwise, this one appears to have been all black with no highlights.

Thanks.

Bob

[stevebo-(Moderator) 8,601]

Not positive but looks like an older c series like c100/120

[rmaynard 16,700]

Not positive but looks like an older c series like c100/120

I'm sure RickV is out in the barn right now comparing the picture to one of his 47 horses and will have the definitive answer momentarily.

Bob

[Bow_Extreme 580]

That dash panel was used on the "B" series tractors and maybe the "C" series as well.

[rmaynard 16,700]

That dash panel was used on the "B" series tractors and maybe the "C" series as well.

It is different than my B-100 as shown below:

Bob

[Sparky-(Admin) 24,035]

I realize that your looking for a NOS dash Bob but whats wrong with yours? Looks good and doesnt seem to be cracked in the picture .

The other one you showed is definitly off a Kohler powered machine as a "C" series with a Briggs did not have a slot for the choke.

Mike..........

[mcwh1950 2]

bob i got this same dash on a 77- b-80 1978 c-81 and a 1979 c-121

if you got this dash on your 1977 b-100 what is the elec clutch use for .

after looking again the b-80 dash is differ ,it doesn't have the hole drill out for a light switch.

[rmaynard 16,700]

I realize that your looking for a NOS dash Bob but whats wrong with yours? Looks good and doesnt seem to be cracked in the picture .

The other one you showed is definitly off a Kohler powered machine as a "C" series with a Briggs did not have a slot for the choke.

Mike..........

Sparky,

The B-100 dash in the picture does not show that it is warped. Also, the embossing has been silver-foil leafed. I don't know how well it will hold up.

Thanks for the info though.

bob i got this same dash on a 77- b-80 1978 c-81 and a 1979 c-121

Duke,

Thanks for that info

Bob

[TT-(Moderator) 1,169]

Guaranteed-original, one-owner 1976 B-80 dash with both toggle switch holes plugged with the correct plastic plugs:

I can't remember if my 1975 B-80 had the electric clutch switch hole or not. :thumbs:

[HankB 16]

Looks like the same dash may have been used on the A-80 as well.

[Sparky-(Admin) 24,035]

Whats that extra thing just to the right of the choke lever? Looks like a push button ?

Mike..........

[TT-(Moderator) 1,169]

Whats that extra thing just to the right of the choke lever? Looks like a push button........

Nitrous? :thumbs:

[Bow_Extreme 580]

I also believe these dash panels were interchanged on some of the very same models. I have a dash with holes for all options that came off a B-100 and also pulled a matching one off a B-80. They could have been swapped out at one time or another as I wasn't the original owner nor did I acquire them from the original owner.

[buckeyebill440 0]

Same as my C121....

[bork 0]

Whats that extra thing just to the right of the choke lever? Looks like a push button........

Nitrous?

:wwp:

[rmaynard 16,700]

Whats that extra thing just to the right of the choke lever? Looks like a push button ?

Mike..........

That is a cigarette lighter.

Bob

[rmaynard 16,700]

All of the ones that you guys have shown pictures of are different. The one I am asking about has no cigarette lighter hole, no electric clutch hole, and no rabbit or turtle symbols.

My B-100 dash does have the holes for the lights and clutch, but they are plugged like in the picture that "TT" attached.

Bob

[Daddy Don 911]

Same dash as my 1979 C111

[HankB 16]

Whats that extra thing just to the right of the choke lever? Looks like a push button........

Nitrous?

You wouldn't believe how fast....

No, just a push button on/off switch. Judging by the look of the other dash panels, I don;t think it is OE. Nothing connects to it and there is nothing on the tractor to power with it.

[rickv1957 77]

Bob,looks like a late 70s dash for sure,Rick

[rickv1957 77]

Bob,your original dash looks good,cant see how it is warped in picture but you can use a heat gun and maybe straighten out,has worked great for me,also all dash panels were highlighted when new,Rick

[rustynut 4]

im sayin its a c-120

[rmaynard 16,700]

Bob,your original dash looks good,cant see how it is warped in picture but you can use a heat gun and maybe straighten out,has worked great for me,also all dash panels were highlighted when new,Rick

Rick,

I have tried heating it and putting a reverse stress on it, but it keeps going back to the same old bow. I know it doesn't look all that bad, but because of the location of the bow, it is going to catch dirt and water. I guess I could use some glue and glue it to the back plate.

I'm still thinking hard about the NOS panel that you have.

Bob

[mnWHfan 47]

That dash was used on the 1978 and 1979 C-series tractors. I have that same one on each of my C161's.

[bitten 134]

I have thought about putting it in a oven on a flat surface. Anyone try this?