buckrancher 2,694 #1 Posted January 12, 2010 Does anyone know if eary RJ's had a camber angle on the front spindle's I have one that looks like it has never been broken and rewelded and it checks 95 degree's and five other's that look like they may have been broke and rewelded. that are 90 degree's with 95 degree's camber the front wheels look like a tricycle front only wide or is the one a lack of quality control by the ponds in manufacturing :thumbs: Share this post Link to post Share on other sites
rickv1957 74 #2 Posted January 12, 2010 Ive seen them the other way also,out at the bottom,Rick Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #3 Posted January 12, 2010 I would think it's an "oops", Brian. Camber should be "set" by the inclination of the spindle bores of the axle, not by the spindle. Since the spindle bores are at 90 Share this post Link to post Share on other sites
buckrancher 2,694 #4 Posted January 12, 2010 I would think it's an "oops", Brian. Camber should be "set" by the inclination of the spindle bores of the axle, not by the spindle. Since the spindle bores are at 90 Share this post Link to post Share on other sites
