Jump to content
Sign in to follow this  
Hallas

New cutting edge

Recommended Posts

I had a new cutting edge put on the truck at work, and took the old blade home for the GT 1142.

downsized_0106001523.jpg

Someone had welded a blade on that was worn to hell.

0106001516.jpg

Drilled new holes and bolted it together. 5/8" thick, dontcha know!

0106001842.jpg

0106001929.jpg

Share this post


Link to post
Share on other sites
 

I think that one will be with you for a while. :thumbs:

Share this post


Link to post
Share on other sites
 

I bet that will add a little down pressure!

Randy

Share this post


Link to post
Share on other sites
 
 
 

Not to take over the thread, but does anyone know the original size of the wear bar? like the width of it.

I have a long frame, 42" wide blade. I bought used, in good condition, I flipped the wear blade cause it was just starting to wear the backing. So presuming I am the 1st to flip it . I just measured the new half, from edge to center of bolt. which measures 1-1/4" . So double that for the total width of 2-1/2".(when new?) Maybe someone else will chime in, that has a new blade, to tell you for sure.

Share this post


Link to post
Share on other sites
 
 
 

I just bought a 48 " 4 inch (2 inches beveled) cutting edge for the loader bucket I'm having built. Cost me $28.00. I don't think I did to bad. They build those big Pro -Pusher loader blades there and that's what's on them. :thumbs:

Share this post


Link to post
Share on other sites
 

Not to take over the thread, but does anyone know the original size of the wear bar? like the width of it.

I have a dXF file of the blade if your interested or I can make a drawing off of it. I made a few 2 years ago at work on the laser. I made them 1/4 thick though.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×