mark89 0 #1 Posted January 2, 2010 I found this blower for my C-120 auto. It was not to far form my house payed 30 dollers for it. I am trying to find out what the model an if u guys think it was a good deal Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #2 Posted January 2, 2010 I would say that it wasn't a bad deal. It could be any of quite a few different model numbers but it's definitely newer than 1973. I'm going to go with 1976 & newer because of the chute rotation plate/decal on the end of the crank support If you're familiar with the Toro MPV (master parts viewer) or other parts lookup sites such as PartsTree, you can try these model numbers: 66-42ST01 76-42ST01 86-42ST01 96-42ST01 Share this post Link to post Share on other sites
Sparky-(Admin) 23,138 #3 Posted January 2, 2010 Did ya get any other stuff with it? You will need a lift bar and lift flag if not. Seems like a descent price and with a bit of sanding and a couple rattle cans of red it'll look great. Mike.... Share this post Link to post Share on other sites
Kelly 1,033 #4 Posted January 2, 2010 Yes it was a good deal I just sold one about that shape with no lift bar or flag and I got $50 for it. Share this post Link to post Share on other sites
rickv1957 74 #5 Posted January 2, 2010 Looks like a good buy to me!,Rick Share this post Link to post Share on other sites
leichty 0 #6 Posted January 2, 2010 Looks like a pretty good deal to me. Share this post Link to post Share on other sites
WH854 45 #7 Posted January 2, 2010 It looks like the one i have I paid $75 for it. Mine still had the ID tag still on it. 96-42ST01 (1979) Here is what it looks like. You got a good deal!! http://www.wheelhorseforum.com/index.php?showtopic=13954 Chas. Share this post Link to post Share on other sites
mark89 0 #8 Posted January 3, 2010 Did ya get any other stuff with it? You will need a lift bar and lift flag if not. Seems like a descent price and with a bit of sanding and a couple rattle cans of red it'll look great. Mike.... no lift flag or bar i had to make one it only cost me 12 bucks to make an about 2 hrs time Share this post Link to post Share on other sites
Cody 277 #9 Posted January 3, 2010 nice fabrication looks like that will work great for you, and good buy on the snow blower. Share this post Link to post Share on other sites
mark89 0 #10 Posted January 7, 2010 thank you for all the help so far. wante to know what the best size v belt would be Share this post Link to post Share on other sites
WH854 45 #11 Posted January 7, 2010 The part # is (9750) I think the width is 5/8, don't know the length,hope this will help. Chas. Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #12 Posted January 7, 2010 OEM #9750 is actually .656" wide X 69" long, but a 5/8" wide belt works fine. The Gates belt # would be 6969. Share this post Link to post Share on other sites
d180man 5 #13 Posted January 7, 2010 Hi looks good to me ! good luck on it ! :WRS: Share this post Link to post Share on other sites
mark89 0 #14 Posted February 10, 2010 got the blower hooked up an worked grate. heres a pic of it on my C-120 auto with the diffrent hood decals Share this post Link to post Share on other sites
W9JAB 156 #15 Posted February 10, 2010 Mark, nice job on the lift bar and flag, I would like one myself! Might be a nice side line. As far as a good price well yes as a "core" now I know I'm a litter bitter, I paid $100 for mine, and it looked pretty good. I thought I would get some use out of it before any real work was needed. Boy-O-Boy was I wrong! Might take a look at this post, good luck with yours. http://www.wheelhorseforum.com/index.php?showtopic=14867 Share this post Link to post Share on other sites
