kydeerhunter06 0 #1 Posted December 15, 2009 what would it take to put a swept front end off a 520 on a 314 has any one done this i was thinking about doing this to run a 60 inch deck on my 1999 314-8 Share this post Link to post Share on other sites
rickv1957 74 #2 Posted December 15, 2009 I know that can be done if you got the right parts but a 60" deck will be a chore for 14hp,Rick Share this post Link to post Share on other sites
Kelly 1,033 #3 Posted December 15, 2009 Like Rick said a 60" deck is kinda big for a 14hp, but you will need the complete front end axle, spindels, tie rods, front wheels, lower steering gear, and all the correct bearings if you have all the parts it's a bolt in. Share this post Link to post Share on other sites
kydeerhunter06 0 #4 Posted December 15, 2009 ok well if it going to take all that i leave it with the 48 inch deck i have on it it was just a idea might pick up a pull behind mower to give me the extra cutting area Share this post Link to post Share on other sites
