Raider12puller 1 #1 Posted December 7, 2009 Was wondering if anyone has snowblowed with a c-81 or compariable hp tractor before with and 8spd. Just thought a good snow would bog the motor down to much to blow snow with a single stage. Share this post Link to post Share on other sites
pfrederi 18,643 #2 Posted December 7, 2009 I used the C-81 with a blower. it worked but it was in low range most the time and that engine was snorting hard. I took the side wings off the blower. After that year I got more tractors with more HP. Share this post Link to post Share on other sites
Raider12puller 1 #3 Posted December 7, 2009 I have a two stage which I will be doing most of my blowing with. Was just thinking about using it when there wasnt enough snow to bring the two stage out. Share this post Link to post Share on other sites
HankB 16 #4 Posted December 7, 2009 I have a two stage which I will be doing most of my blowing with. Was just thinking about using it when there wasnt enough snow to bring the two stage out. I pushed snow for years with a Charger V8, short frame 42" plow and rear tire chains. If you're looking for something to use when there isn't a lot of snow, I would suggest doing that. Share this post Link to post Share on other sites
rickv1957 74 #5 Posted December 7, 2009 8hp is plenty to push snow with a blade,but a little small for a blower,Rick Share this post Link to post Share on other sites
