Dale 0 #1 Posted December 6, 2009 i know where a 633 is for 200.00 the hood has a dent in the top looks like someone sat on it. the engine is not the right one. i have a kohler 8hp will this engine bolt in? will the hole in the belt sheild line up with the kohler 8hp or should i pass? i want a round hood bad but can't find one :notworthy: Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #2 Posted December 6, 2009 i want a round hood bad but can't find one The first thing you need to do is calm down. If you jump at something too quickly you will regret it. There are tractors out there and you will find a decent one at a good price - it just might not be today. Check the local classifieds, auction listings, and online sites (but watch out for the over-inflated eBay prices ) and be patient. If you can wait until June, make a trip to the WHCC show in PA and I'm sure you'll find one there. As for your 633 questions....... A 633 originally had a Kohler K-141 so a K-161 and K-181 (and an M8 Magnum) will also fit. The 633 was originally recoil start only, so you'll need to do the wiring to match the engine and if you use an engine with a gear-drive starter you'll need a smaller battery than the standard L&G type. Share this post Link to post Share on other sites
bitten 134 #3 Posted December 6, 2009 TT does have a very good point, dont rush into something. If its in your price bracket(seems high to me) and you are able to do the work then go for it. If not walk away till a better day. Good luck Share this post Link to post Share on other sites
Indy w h 5 #4 Posted December 7, 2009 Tell the owner all the problems on it and see if he'll come off the price any(like the wrong engine) ya never know!! Or offer him $100 Indy Share this post Link to post Share on other sites
Dale 0 #5 Posted December 7, 2009 Im going to wait to find a 654 or a 854 or a simaluar model. used to have a shed full. sold them off got married had kids getting back into them now. Share this post Link to post Share on other sites
