dunk50 6 #1 Posted November 17, 2009 Trying to do a search on tractor speed. My C-160 moves fine (read fast) in forward but reverse is really slow as compared to my 416. Tried doing a search on speed but you get a ton of 8 speed, 4 speed etc but none on actual tractor speed. Is there any way to limit or use more than one word and get results. Thanks Share this post Link to post Share on other sites
CasualObserver 3,411 #2 Posted November 17, 2009 Your searching for a hard topic to hit if you don't have some other less common keywords to go from. I did manage to come up with this one for you though.... 520H Speed Question Share this post Link to post Share on other sites
Rollerman 290 #3 Posted November 18, 2009 Dunk first I want to thank you for useing the search feature. I know it can be very frustrateing at times. I really can't add much to what Jason has sugested. You may want to take a look at Duke's "horsefixer" about his custom snowblower tractor he's currently building. In that thread it shows some details of the Sundstrand hydro controls. (Towards the bottom of page two) http://www.wheelhorseforum.com/index.php?...pic=13093&st=50 I'll add that any Sundstrand driven Horse I've owned has been slower in reverse. The cam pin will start to become flat on the sides from wear and won't want to ride as far into the cam follower reduceing the performance & speed of the Sundstrands. Share this post Link to post Share on other sites
dunk50 6 #4 Posted November 18, 2009 Thanks to both of you. I will con't doing the search and try a few more words. Dunk Share this post Link to post Share on other sites
wheel horse 1045 2 #5 Posted November 18, 2009 i had that problem with my C160 paul and it was my cam plate that was broke,if you need any help you can call me. Share this post Link to post Share on other sites
dunk50 6 #6 Posted November 18, 2009 I may do that Archie, right now I'm butt hole deep in a construction mess. Can't get to it! Share this post Link to post Share on other sites
