bork 0 #1 Posted October 31, 2009 I searched forums , no luck. Gates only shows drive. Manual only gives drive belt. I measured & I think before stretch 3/8" wide x 34"long oc. I want to order a blue belt. Share this post Link to post Share on other sites
daemon2525 5 #2 Posted October 31, 2009 I see that you have noticed that it is a thin belt. I just wanted to note that the rope pulley that this belt goes around is pretty thin. I did not know that they made the blue kevlar belts that were thin. I have several old belts that I could measure. You did not ask a question in your original post so I assume that you are asking for the length? Share this post Link to post Share on other sites
bork 0 #3 Posted October 31, 2009 Oooops . sorry . yes size, or length or part # etc.. Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #4 Posted October 31, 2009 The S/G belts are technically Kohler pieces so I crossed the Kohler # to a Gates 7345. They're a constant tension belt so there's no need for a fabric-coated, power rated belt in this application. Share this post Link to post Share on other sites
bork 0 #5 Posted October 31, 2009 Thanks TT, but where did you find the Kohler #? :scratchead: Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #6 Posted November 1, 2009 I got it from my book, but you can find Kohler information at PartsTree. (or other online parts supplier websites) Once you have the OEM number you can cross it on the Gates website. Share this post Link to post Share on other sites
