Tach-A-Matic Location On Chassis

[tarcoleo 119]

On my C-111, the TAM unit is located about 2 inches

toward the back of the machine compared with its

location on my C-81. Is this kosher or has one or the

other been tampered with? Where should the TAM be

along the chassis, measured from where?

Tom in RI

[Don1977 605]

I don't know but my C-120 is located 12" from the front to the center of the attachment slot. I know it came that way, I bought it new. Hope this helps.

[whfan74 2,073]

Tom,

If it isn't too much trouble throw up a pic for everyone else to see. That would give you some quick feedback. Looking forward to help!

[tarcoleo 119]

The distance from the center of the TAM slot to the front end of the chassis

is 13-1/4" in the C-111 and 11-1/4" in the C-81. The front end of the

chassis is where the cross-piece is attached directly to the chassis rails and

includes the 1/4" thickness of that cross-piece. The measurement is

not measured diagonally but along a level line between vertical lines

aligned with the slot and the end of the chassis. I'll be interested to know

what other C-series measurements are. Thanks in advance,

Tom in RI

:scratchead:

[Kelly 1,033]

Did someone bolt it on backwards? that would be about 2"

[tarcoleo 119]

Kelly-

They're both looking in the same direction. (Murphy wasn't here.)

Tom in RI :scratchead:

[tarcoleo 119]

Further investigation has solved the mystery. On the C-111 in its

previous life, the TAM on the chassis was moved rearward. Close

inspection shows the imprint of the device having been mounted

2 in. forward of its present location. Sorry fellahs, you don't need

to go out into the cold barn to make measurements for me.

Tom in RI

:scratchead: