Jump to content
CCW

Mow deck spindle question

Recommended Posts

CCW

The 36 in RD mower deck on my 312-8 is nearly 40 years old.  It has always been garage and the shell is as solid as the day it was bought.  Over the past couple of years I have been adding grease via the zerks and all appears to work great though it is very loud while engaged.  

 

My concern is the grease at the bearings.  Does it dry out that new grease may not be reaching the bearings?  How do I know if I have added enough grease?  Or is this a case of if it ain't broke don't fix it?  I hate to disassemble the deck if there is no sure benefit.

 

 

Edited by CCW

Share this post


Link to post
Share on other sites
 
8ntruck

It is probably time to disassemble the spindles.  If you have noise that wasn't there in the past, something has changed - a bad bearing, a worn shaft, etc.  Check the spindles individually for smooth rotation, end play, and radial play.  That should give you a clue as to which one is the worst, therefore the one to start on.  Remember, all the spindles have been in service the same amount of time.  If one is bad, the others probably are reaching the end of their service life too.

 

I've got three decks that I need to have that done.

  • Like 3

Share this post


Link to post
Share on other sites
 
gwest_ca

If you remove the spindle belt and feel and spin each pulley you may find they don't feel or sound the same. A good first step in your inspection. Find a bad one then make the necessary repairs followed by another spin comparison. By now you will know what a good spindle assembly sounds like.

  • Like 2

Share this post


Link to post
Share on other sites
 
953 nut

This old thread may be helpful.

 

Share this post


Link to post
Share on other sites
 
peter lena

@CCW , ben using  lucas  xtra  hd green chassis grease , in every , CLEANED OUT   bearing , for  years , walmart  $  8, my  mower decks and related  pto bearings , spin with silent ease . bearing whine and roughness is telling you of failure , also related to belt fraying / cracking , many years  in no failures , pete

Share this post


Link to post
Share on other sites
 
953 nut
On 11/19/2026 at 11:14 AM, 8ntruck said:

I've got three decks that I need to have that done.

When you do the bearing replacement PLEASE do a Tutorial thread with lots of pictures, list of tools needed, and part numbers. There is very little useful information on this subject that has been posted.

Share this post


Link to post
Share on other sites
 
Brockport Bill

i have rehabbed numerous decks and spindles -- new bearings installed etc -- not my favorite job but something worth doing -- removing and re--installing the snap ring and getting out the old bearings and tube is not fun but is a learned skill.

 

there are some You Tubes but maybe not WH but all same principle ---  the key factor to understand is unless the bearing has one rubber seal removed, then the grease for zerk doesn't really lube the ball bearings inside the bearing. A 2 sided seal is in fact a "sealed" bearing.

 

last point, if you ever need spindles, or spindle parts like a shaft, pulleys etc,  I have always been happy with K&B in pennsylvania for help - good service and prices.

 

attached photos of spindle project - rebuilt bearings and painted etc

 

as one fyi -- to remove the tube and lower bearing i first remove snap ring - - then i use a long socket that fits inside the top bearing -- i then use hammer to hit the socket and drive the tube down onto lower bearing to "punch" it out - once the lower bearing is out then i insert socket from bottom to hammer tube to knock out top bearing.

 

have paper towels near by for all the grease!!!

 

have fun !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Bill

wh 3 spindles rehabbed.jpg

wh spindle paint.jpg

wh 3 spindles painted.jpg

wh 36 rd Ct For Sale bottom.jpg

wh 36 rd Ct For Sale top front view.jpg

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...