Chaz54 102 #1 Posted yesterday at 02:08 AM I have a 1988 520H Wheel Horse that I’m trying to change out the starter. How do you get it out? Do I need to remove the flywheel? Share this post Link to post Share on other sites
953 nut 70,389 #2 Posted 17 hours ago This Onan Service Manual from our Banuals section will give you all the guidance you should need. 3 Share this post Link to post Share on other sites
Chaz54 102 #3 Posted 7 hours ago The description is just a basic description that is not a complete description of how the starter can be removed from the engine. Anyone who has ever changed their starter is who I’d like to know more about how they did this. It seems like I’m going to either remove the flywheel or pull the entire engine off the engine mounting plate. Share this post Link to post Share on other sites
squonk 48,350 #4 Posted 6 hours ago 20 minutes ago, Chaz54 said: The description is just a basic description that is not a complete description of how the starter can be removed from the engine. Anyone who has ever changed their starter is who I’d like to know more about how they did this. It seems like I’m going to either remove the flywheel or pull the entire engine off the engine mounting plate. I think I heard somewhere that they had to lift the engine. Share this post Link to post Share on other sites
953 nut 70,389 #5 Posted 5 hours ago According to the Service Manual I attached to my previous post it seems rather straight forward. You probably should remove the hood hinge assumedly fitst. Share this post Link to post Share on other sites