Jump to content
Phillippio

My First Wheel Horse

Recommended Posts

 
 
SylvanLakeWH

:text-welcomeconfetti:

Share this post


Link to post
Share on other sites
 
ebinmaine

:text-welcomeconfetti:

Share this post


Link to post
Share on other sites
 
ri702bill

Yup - looks to be a 702. The steering wheel is not original. Do you have the drive belt guard? You WILL need one to allow for proper clutch action - to stop the belt.

You are also missing the Starter/ Generator guard - not absolutely necessary.

  • Like 1

Share this post


Link to post
Share on other sites
 
Phillippio
30 minutes ago, ri702bill said:

Yup - looks to be a 702. The steering wheel is not original. Do you have the drive belt guard? You WILL need one to allow for proper clutch action - to stop the belt.

You are also missing the Starter/ Generator guard - not absolutely necessary.

I have the large belt guard for the drive belt.  No belt guard for the starter.

I had her running yesterday.  I put a battery in her and now there is no spark.  Fun times tracking that down.  I have the wiring diagram so it should be easy.  Not much to it.

 

  • Sad 1

Share this post


Link to post
Share on other sites
 
953 nut

:WRS:

Yep,   702 for sure.   On the no spark issue be sure the battery negative is grounded and the positive goes to the ignition switch.  :hide:  Please don't ask how I know this.

Here is a link to the information we have on all the 1962 models.

 

Share this post


Link to post
Share on other sites
 
oliver2-44
On 11/18/2026 at 1:51 PM, Phillippio said:

Rear axle turns freely but the transmission is a little sticky, and I hope it is not seized. 

 

Draining, then filling the transmission with diesel or kerosene for a soak and flush may help loosen up the transmission from sitting all those years. 

Edited by oliver2-44
  • Like 6
  • Excellent 1

Share this post


Link to post
Share on other sites
 
Achto

:WRS:

 

Nice score. :handgestures-thumbupright:

Share this post


Link to post
Share on other sites
 
sqrlgtr

:WRS: great find solid bones. The seat looks to be in great shape and they are getting hard to find now. Hydro unit is a plus also. Already had it running so good motor. Could probally find sart/gen belt gaurd if you run a post in wanted ads but be aware there not all the same and belive there is at least 3 different ones. Hard to tell in pic but if other rear tire is in good as shape as the one I can see thats a big plus also. Looking forward to your progress keep us posted. I will suggest becoming a supporter if you are going to stick around a while definitely worth all the knowledge and easy picture posting.

  • Like 2
  • Excellent 1

Share this post


Link to post
Share on other sites
 
Troll183

Welcome to Red Square. Nice score.

Share this post


Link to post
Share on other sites
 
Phillippio
On 11/19/2026 at 10:22 AM, sqrlgtr said:

:WRS: great find solid bones. The seat looks to be in great shape and they are getting hard to find now. Hydro unit is a plus also. Already had it running so good motor. Could probally find sart/gen belt gaurd if you run a post in wanted ads but be aware there not all the same and belive there is at least 3 different ones. Hard to tell in pic but if other rear tire is in good as shape as the one I can see thats a big plus also. Looking forward to your progress keep us posted. I will suggest becoming a supporter if you are going to stick around a while definitely worth all the knowledge and easy picture posting.

The other rear tire is also in good condition!  She is in decent shape.  A few things to tidy up.  The pedals and foot rests(?) are vey loose and a crack in the frame to weld up.  Very difficult to shift but I did get a little movement out of the transmission.  I hope to free that up.

Share this post


Link to post
Share on other sites
 
Phillippio

I tested the hydraulic system and it spewed too much out the old hoses to move the piston.  I will have to make or get some new lines for that.  

Share this post


Link to post
Share on other sites
 
 
Handy Don
50 minutes ago, Phillippio said:

I tested the hydraulic system and it spewed too much out the old hoses to move the piston.  I will have to make or get some new lines for that.  

Many of the hose-end fittings WH used are no longer in common use, but they are still available.

Something to keep in mind is that the HY probably maxes out at less than 700 psi so no need to go overboard on hoses--single ply is enough (more flexible and smaller diameter, too).

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...