Jump to content
mjp1853@gmail.com

Wheel Horse 315-8 Electric PTO

Recommended Posts

mjp1853@gmail.com

Hey All,

 

Just bought a 315-8 after not being able to find a 314-8 with a Kohler CH14.

 

I didn't realize that they have an electric PTO and am concerned about the reliability and replacement cost of them.

 

I was able to buy it right less than 400 hours for $650, but the paint isn't the greatest because of how it was stored.

 

In any event, I want to convert back to a manual PTO.

 

Has anyone ever done this?

 

I was able to find an older 312 / 1992 / K804 parts tractor for $250....I think I can sell the engine or deck and break even.

 

From my research, it looks like both have 1" crankshafts extending around 3".

 

Am I correct in thinking, I can use the linkage and side sheet metal from the 312 to convert to a manual setup like on the later(1999-2001) 314s?

 

The only other consideration would be to unwire the electric PTO switch?

 

Does it have to be shorted out like the seat and mow in reverse or left in an open position?

 

Thanks for your input....I really appreciated it.

 

Mark

 

 

Share this post


Link to post
Share on other sites
 
gwest_ca

Welcome to Red Square

The pto clutch is electric because the CH engine is not capable of handling the thrust pressure of a manual pto.

Share this post


Link to post
Share on other sites
 
pfrederi

Wheel horse used an external thrust bearing on some B&S powered WHs.  it may be possible to do something similar to your CH  engine

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...