Jump to content
Fordiesel69

523xi Dm850 oil leak behind front flywheel.

Recommended Posts

Fordiesel69

So the forum has a limit of 0.97mb on the photo size so I can't get my phone to take a photo that low resolution.  Anyways the leak is between the engine block and the aluminum housing that is located behind the flywheel on the front of the engine (pto) side.  

 What does this involve.  I'm not super interested in pulling the engine out of the tractor.  

Share this post


Link to post
Share on other sites
 
953 nut
16 hours ago, Fordiesel69 said:

the forum has a limit of 0.97mb on the photo size so I can't get my phone to take a photo that low resolution

You can become a Supporter and picture posting problems will go away.

 

Share this post


Link to post
Share on other sites
 
Handy Don

Depending on your phone’s software, you might be able to crop the image to include only the critical area and that would make it smaller. Another option is to export the image as a lower resolution JPEG and upload the exported file. 

Lots of YouTube vids on this topic. 

Share this post


Link to post
Share on other sites
 
Fordiesel69

I will re do it as a video and put on yt. I can get the file size cropped to 1.3mb from 6.56mb.  

  • Like 1

Share this post


Link to post
Share on other sites
 
 
Fordiesel69

Anyone? 

Share this post


Link to post
Share on other sites
 
Handy Don

523xi is well outside my experience.

Share this post


Link to post
Share on other sites
 
OoPEZoO

There is much less 5xi model discussion on this forum as compared to the classic 300-500 classic models.  Its not that they aren't loved, its just a numbers thing.....and the diesel variant you have is even less represented.  That is the only Wheel Horse / Toro made that got that engine, so not a lot of people here have experience with them.  If you are on Facebook, it might be worth joining the 5xi garden tractors group and asking.  Its pretty active and a few of the guys really seem to know their stuff.

 

That being said, I assume the bare minimum to fix a leak at that location would require removing everything off that end of the engine to get to whatever seal is leaking.  I have a 522xi I'm becoming pretty familiar with, but that means nothing compared to your diesel.  After looking at the manual below and comparing it to your video, it looks to me like it "could" be the rear main seal?  Kinda hard to tell.  It looks like the location of the back of the camshaft, but I don't see any seals in that location when looking at the manual.  Makes me think its potentially the main seal around the crank shaft, and its building pressure and pushing the oil out?  Just a guess, but it appears to be the only seal in that general vicinity.  Looks to me like you would have to pull the hood, PTO, and flywheel.  Then pull the starter and mounting bracket off.  That should give you access to the rear seal retainer.  Pull that off, replace the seal, and reassemble. I know I personally would also have zero interest in pulling that motor unless it was absolutely necessary.  I would attempt it without pulling the motor.  If you get into it, please take pictures and post them as you go. 

 

Here is a link to the engine manual

 

Edit.....and the service manual if you don't have it

 

Edited by OoPEZoO
  • Excellent 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...