Frankj 1 #1 Posted Thursday at 05:08 PM Hey guys. I have a wheel horse workhorse 700 and the shifter is loose can almost pull it out It’s not shifting into gears. Does anyone know what I have to do to replace it or repair it? 1 Share this post Link to post Share on other sites
stevasaurus 23,873 #2 Posted Thursday at 06:35 PM There is a set screw you can see in the 3rd picture. It has a locknut (7/16) on an Allen Head dog point set screw. Need a 1/8" set screw wrench to tighten. If you loosen the set crew, you can pull out the shifter and check it to see if it is OK. We have a thread around here some where that shows how it all works. I'll try to find it for you. Here ya go. 4 2 Share this post Link to post Share on other sites
Handy Don 17,654 #3 Posted Thursday at 06:46 PM When done getting the shifter back in order, be sure to have a good shifter boot back in place. Essential for keeping the innards free of junk and water. 5 Share this post Link to post Share on other sites
953 nut 70,185 #4 Posted 14 hours ago Now that Don and Steve have your shifter problem solved please tell us a bit about your and yourself. https://www.wheelhorseforum.com/forum/47-introductions/ 1 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,528 #6 Posted 11 hours ago Welcome to Red Square. Click on the picture in this link for more 1 1 Share this post Link to post Share on other sites
Frankj 1 #7 Posted 6 hours ago Thanks guys !! I’ll let yall know how it goes ! Share this post Link to post Share on other sites
