1968Commando 189 #1 Posted Sunday at 03:09 PM Okay I know I’ve asked this question before but anyways I have a locking throttle well, it got messed up somehow I guess and now all the wheel does is spin on the stud, so I need a new throttle cable as well as a governor wheel with that little nibble thing that sticks out for better control, were is the best place to find one Share this post Link to post Share on other sites
Bar Nuthin 3,397 #2 Posted Sunday at 03:33 PM (edited) I got lucky and stumbled upon one at a swap meet. Governor/Throttle disc 231329 K161 - Wanted - RedSquare Wheel Horse Forum If you post the engine model number and spec number, I can help you find the exact part number (there are several variations) Sounds like you may need a new governor spring as well. Edited Sunday at 03:39 PM by Bar Nuthin Share this post Link to post Share on other sites
1968Commando 189 #3 Posted yesterday at 04:48 AM It is a Kholer k181 the motor has been replaced with another k181 but this one wasn’t a wheel horse spec engine from what I have been able to find information about Share this post Link to post Share on other sites
Bar Nuthin 3,397 #4 Posted 5 hours ago (edited) 22 hours ago, 1968Commando said: k181 but this one wasn’t a wheel horse spec engine I may be wrong but I believe all of the K series have a spec number. It's not exclusive to Wheel Horse. Are the tags missing from the engine's shroud? Edited 5 hours ago by Bar Nuthin Share this post Link to post Share on other sites
1968Commando 189 #5 Posted 4 hours ago The shroud I had had a sticker on it, well now it’s been restored and the original sticker was un readable anywau 23 minutes ago, Bar Nuthin said: I may be wrong but I believe all of the K series have a spec number. It's not exclusive to Wheel Horse. Are the tags missing from the engine's shroud? Share this post Link to post Share on other sites
