ri702bill 13,212 #2 Posted 10 hours ago (edited) So - was it cracked, rotted, hit with a bus? A fairly common part used over many years & models - some exact, some may need a hole or two added. Edited 6 hours ago by ri702bill 2 Share this post Link to post Share on other sites
Lee1977 7,805 #3 Posted 5 hours ago Some of the 1974 and 1975 models brake where they are bolted to the side of the frame. It maybe they got bad metal, Chargers and Raider were made the same and as far as I know don't have that problem. They changed to bolting to the top of the frame in 1976. My 1977 C-120 cracked back into sheet metal that holds the shifter plate. Share this post Link to post Share on other sites
BPEisenhower 685 #4 Posted 1 hour ago I let the neighbor borrow it to mulch his leaves. He was on a hillside mowing and rolled it multiple times. He wasn't hurt but all that time is gone from all the work. Motor still runs and have an Automatic 12 it's going in. Lesson learned, next time, I'm loaning out a Murray or I will do it myself Share this post Link to post Share on other sites
