Kendric33 8 #1 Posted 19 hours ago A while back I would this guy in the weeds of a retiring small engine mechanic. It was completely seized up when I got it, but a few buddies and I got it freed up. I have never seen a spark plug more corroded than this one! It's a chain-driven Front Wheel Drive, and only one lever controls the cutting height by raising or lowering all four wheels at the same time. Any information on the Wheel Horse push mowers would be greatly appreciated! 6 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,508 #2 Posted 18 hours ago We have the mower decks listed by type and width of cut. As soon as the page opens click on the "Sort by" and select "Title". They will come back in chronological order and you can sort through the pages. Let us know which one you have so we can take a look. https://www.wheelhorseforum.com/files/category/18-mower-decks-reel/?sortby=file_name&sortdirection=asc Share this post Link to post Share on other sites
Kendric33 8 #3 Posted 18 hours ago 50 minutes ago, gwest_ca said: We have the mower decks listed by type and width of cut. As soon as the page opens click on the "Sort by" and select "Title". They will come back in chronological order and you can sort through the pages. Let us know which one you have so we can take a look. https://www.wheelhorseforum.com/files/category/18-mower-decks-reel/?sortby=file_name&sortdirection=asc I see the file! It uses the pictures of my mower above. My buddy had posted it here about two years ago and there it is again! 1 Share this post Link to post Share on other sites
953 nut 69,785 #6 Posted 14 hours ago I had a mower with a cast aluminum deck (not Wheel Horse) like that about fifty years ago in Florida. Mowing in sandy conditions literally sand blasted a cut clear through the cast aluminum after a dozen years. Unplanned obsolesce. Share this post Link to post Share on other sites
Kendric33 8 #7 Posted 14 hours ago 13 minutes ago, 953 nut said: I had a mower with a cast aluminum deck (not Wheel Horse) like that about fifty years ago in Florida. Mowing in sandy conditions literally sand blasted a cut clear through the cast aluminum after a dozen years. Unplanned obsolesce. I would imagine mowing in sandy soil would dull your blade awfully fast! 1 Share this post Link to post Share on other sites
953 nut 69,785 #8 Posted 2 hours ago 11 hours ago, Kendric33 said: I would imagine mowing in sandy soil would dull your blade awfully fast! In Florida the mowing season is about ten months and blades need sharpening about three times a season, by then the back uplift lip is gone and you are mowing with thin knives. Over the years I added compost to the yard and the sand wasn't a problem anymore. 2 Share this post Link to post Share on other sites
sqrlgtr 4,090 #9 Posted 1 hour ago Cool mower. A first for me, never seen a WH push mower before. Closest thing to WH push mower Ive seen around here is when I run one of my tractors out of fuel and had to push it back to shop . 4 Share this post Link to post Share on other sites
Mike'sHorseBarn 3,699 #10 Posted 1 hour ago I'd like to add one of those to my collection someday. Great find! Share this post Link to post Share on other sites
