bradleydavidgood 44 #1 Posted 15 hours ago (edited) Edited 15 hours ago by bradleydavidgood 1 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,502 #2 Posted 4 hours ago When I do this I use are longer bolt with about 3/8" of unthreaded rod below the head. This way the rotating parts are not pivoting on bolt threads which will cause wear. The unthreaded part extends through the complete assembly plus a bit. Add enough flat washers below the nut so there is room for future adjustment. Cut off the threads that are not used. Reaching in with two wrenches to make future adjustments is a breeze. 2 Share this post Link to post Share on other sites
peter lena 10,081 #3 Posted 3 hours ago @bradleydavidgood personally have added a light / medium extension spring to all my , choke / throttle cables , at the opposite end , to pull it closed / stop ? that way you always have a MOVEMENT ASSIST , to any cable movement , of course ,all my cables are lubricated for movement function , https://www.google.com/search?q=light+extension+spring&rlz=1C1CHBF_enUS866US866&oq=light+extension+spring+&gs_lcrp=EgZjaHJvbWUyCggAEEUYFhge like 3-1 penetrating oil , easy to experiment on this , years in usage , consistently work . pete 1 Share this post Link to post Share on other sites
