BPEisenhower   684 #1 Posted Wednesday at 11:10 PM Good evening Horse Family 😀. So, after work I stared at my project wondering how and what I was going to do about a PTO 😕. Walking away to see if I had the heart to take my electric PTO off another engine, I seen the big box of parts that I hadn't gotten to examine yet. Surprise! Two manual PTOs, extra starter, muffler shroud, coil, charging circuit, piston, bearings and an assortment of fasteners. Didn't take long and finally got a PTO that may or may not be period correct but it's on there. Packed bearings with grease and bolted on the mount for the lever. Looks better and I can cross it off the list. I do need to find the front mount for the Tach Matic so I can run one of the few newer, bigger decks like on the C120 and C195. Ag tires ordered and all fluids changed before the weekend.  2 3 Share this post Link to post Share on other sites
ebinmaine   80,860 #2 Posted Wednesday at 11:23 PM 9 minutes ago, BPEisenhower said: Didn't take long and finally got a PTO that may or may not be period correct but it's on there.  What year tractor? I personally prefer the look of the older ones like that.   10 minutes ago, BPEisenhower said: I do need to find the front mount for the Tach Matic so I can run one of the few newer, bigger decks  Might be easier to just weld up a later type frame/ axle holder to some pieces of flat steel to bolt through the frame.  Share this post Link to post Share on other sites
Sparky-(Admin)   26,472 #3 Posted Thursday at 11:28 AM Gotta love boxes of parts!   Have many of em here, mosty assorted but some boxes are tractor/model specific.   1 Share this post Link to post Share on other sites
BPEisenhower   684 #4 Posted Thursday at 02:17 PM 14 hours ago, ebinmaine said:  What year tractor? I personally prefer the look of the older ones like that.    Might be easier to just weld up a later type frame/ axle holder to some pieces of flat steel to bolt through the frame.  I will have to look at the serial number and post picture tonight  1 Share this post Link to post Share on other sites
BPEisenhower   684 #5 Posted Thursday at 09:38 PM 22 hours ago, ebinmaine said:  What year tractor? I personally prefer the look of the older ones like that.    Might be easier to just weld up a later type frame/ axle holder to some pieces of flat steel to bolt through the frame.  1 Share this post Link to post Share on other sites
ebinmaine   80,860 #6 Posted Thursday at 11:01 PM Looks like a 1971 Charger 12 Share this post Link to post Share on other sites
BPEisenhower   684 #7 Posted Friday at 02:07 AM 4 hours ago, BPEisenhower said: Thank goodness you are able to tell me what it is. I was getting concerned if it was or not considering it has a 14 HP now and wasn't sure about the decals. Figured someone pieced it together but all the same it runs, drives and hydraulic lift works. Does have a one bottom plow I can't resist to try sometime after new rear tires 2 Share this post Link to post Share on other sites
