Charrie 20 #1 Posted Saturday at 03:12 AM If I am not mistaken, Toro bought Wheel Horse in 1986. When I visit theToro site, I don't think the parts list goes back that far. There is a 50 yo mower repair shop going out of business and they had an initial sell off last year. Now they are just trying to empty the building for the most part. 3 days left before they close permanently. I am trying to make a list of parts that I might need in the future and see what they have left. So if I could find a good parts list with part numbers for my 1985 416-8 Model #3116K801 serial #11370 ? Also I welcome all suggestions for parts that I should be looking for. I also have a 1994 520-H They seem to have a small Kohler parts section and no actual Wheel Horse section. He said that some local Wheel Horse fan already came in and bought most of what he had. Also, he did not have a full carb kit for the k341 but gave me two different packages with carb parts that I believe do fit. Maybe someone here knows? Kholer 25 757 11 740 kit Kohler 25 757 03-s Kit, Float Repair Thanks Prts I did find Fuel cut off valve Kholer fuel pump 2 sets breaker points, No condenser. 1 spark plug PTO to mower belt Air filter and pre-filter. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,488 #2 Posted Saturday at 04:09 AM The illustrated parts list we have is shared with other models at the time so be careful selecting parts. If you look at the engine page you may be able to identify the included models. This is what Toro has 1 2 Share this post Link to post Share on other sites
Ed Kennell 47,375 #3 Posted Saturday at 11:42 AM 8 hours ago, Charrie said: Now they are just trying to empty the building I look for those gold mines. Buy it all by the bucket full. 4 Share this post Link to post Share on other sites
953 nut 69,379 #4 Posted Saturday at 11:59 AM 4 minutes ago, Ed Kennell said: Buy it all by the bucket full. The "Bucket Master" has sspoken! 4 1 Share this post Link to post Share on other sites
Charrie 20 #5 Posted Sunday at 03:01 AM Thanks for the replies. I found the link with the 416 info in manual section I believe. Since they don' t have any Wheel Horse parts then I think I'll focus on engine parts. For the 416, all of the info I find on the engine is the K341S 71371. I haven't checked to see if they have any Onan parts but perhaps need to do some research there also. They used a company Rotary for their aftermarket parts so maybe a choke or throttle cable. This is different from finding a replacement part for something broken. Without a detailed parts diagram with a part number page, I have to look up each part # and then cross it over to what he has left. Anyway Thanks and YES buckets! If anyone is in the Dalton GA area and interested I'll be contacting the guy and make sure its ok to make this public. I think thelast3 days will be Tuesday-Thursday. Share this post Link to post Share on other sites
Charrie 20 #6 Posted Sunday at 03:14 AM (edited) By looking at the number of posts you guys have made, one or all of you might know the answer to this question. So I was looking at the Kohler fuel pump i bought and it has what appears to be a priming arm built on to it. My original pump does not. It appears like the pump will fit though. Seems like I read here on the forum somewhere about some of the tractors being hard to start because the tank is under the seat. I know the fuel drains back out of the 520 after a couple of weeks. Thanks May have found a partial answer. Came across a post where a k series engine was running an old welder. The engine used the old wrap around rope pull start. That engine also used a fuelpump with a priming arm built on to the pump. Edited Monday at 06:57 AM by Charrie add information Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,488 #7 Posted Sunday at 03:21 AM Here is an online parts list for the engine. If a part is priced it is still available from Kohler https://www.partstree.com/models/k341-71371-kohler-k-series-engine-made-for-wheel-horse-16hp-11-9kw/ Share this post Link to post Share on other sites
Charrie 20 #8 Posted Sunday at 04:32 AM (edited) Thank you for that link. I just spent the last hour copying Kholer part numbers to my list. I hope it is ok to post this link I found Kohler Engines Parts Manual K341 -16HP Specs 71105 - 71384 https://www.barrettsmallengine.net/partslist/kohlerk341-16hp.pdf Also this manual from Kohler https://resources.kohler.com/power/kohler/enginesUS/pdf/tp_2379.pdf Edited Sunday at 05:44 AM by Charrie add information Share this post Link to post Share on other sites
Charrie 20 #9 Posted 1 hour ago (edited) I spoke with the man in charge and he said that it is ok to post directions for anyone who wants to come buy and look for parts. They are starting to box up the shelves this week but said that the mower section would be last. They have a good bit of stuff throughout the store and if one of the boxes on the floor catches your eyes, ask them how much. As far as mower parts, Rotary is their aftermarket supplier. Today i found a starter, partial gasket set, one crankshaft seal, and one of the pepper shaker mufflers for my 416, They have a truck load of chain saw parts if someone knows what to look for. Also lots of different mower blades for unknown machines. Dawnville Hardware. 1358 Dawnville Rd NE, Dalton, GA 30721 Edited 1 hour ago by Charrie Share this post Link to post Share on other sites
